One call does it all.

danny@sealall.ca

416 312 4453

ADDING VALUE. TRANSFORMING HOMES ACROSS TORONTO AND ONTARIO.

    Free Estimate & Consultation

    7 Tough Stains That Pressure Washing Can Take Care Of

    If you are planning for exterior cleaning, then it’s only natural to look for the fastest and effective way to get the stains cleaned.

    That being said, pressure washing Toronto is the fastest way to get the exteriors cleaned. Why do say so? Here’s the reason.

    Pressure washing involves high-pressure water that is used for cleaning the surfaces. Due to high pressure, the dirt and stains are removed quickly without any physical effort. Moreover, power washing is capable of removing tough stains that require a lot of time and hard work in any other cleaning method.

    So, let’s see the 7 tough stains that pressure washing can clean.

    • Lime and Calcium Deposits

    Lime and calcium sediments accumulate on hard surfaces like pools, fountains, and retaining walls. This is because hard water remains in the water. These mineral deposits are hard to remove, but not for pressure washers.

    • Chewing Gum

    No one wants a chewing gum stuck in their exteriors, and the reason is it being +

    the stickiest and hardest things to remove from any type of surface. Pressure washing works wonders on such nasty gooey items even after they have hardened there. You just need to switch to hot water instead of the regular one.

    • Deck and General Stains

    When you go for the professional pressure washing Toronto services, they use special grade commercial detergent for washing. This helps in removing any stubborn stain from all types of exteriors including the fresh interlock repair Toronto patch. You just need to be extra careful with such delicate surfaces including the decking.

    • Graffiti

    Graffiti is yet another thing that you may get bored of after a certain period. And there are very rare removing methods that can pull off this task for you. And one of them is using a pressure washer at 2000 psi or 3000 psi. However, make sure you use a chemical product first in case you are washing metal or brick surfaces. The best way to get it done is by calling pressure washing Toronto services for help.

    • Mold and Mildew

    These fungi and bacteria are one annoying thing in your property that lives rent-free. And its always a better practice to remove them immediately – as they cause problem to your property as well as health. And pressure washing is one method that can help you remove these unwanted visitors from your exteriors.

    • Oil, Grease, and Paint

    With our or visitors’ cars, there’s a chance of getting a garage, driveway, or even your walkway stained with oil or grease. These stains are very difficult to remove if you try with normal soap and water. That’s where pressure washing can make your life easier. The same thing applies to all the peeling and flaking of the pain from your fence.

    • Rust

    If you have metal surfaces in your exteriors, rust won’t be a surprise for you. But that doesn’t mean you should let it stay as it is. You can use the power washer to remove this rust and make it as good as new.

    These are some of the top uses of pressure washing that I can think of. Do you have any stories of your own to share? Let us know in the comment section below.

    And if you are looking for pressure washing Toronto services, contact our experts today.

    Be it a routine work or an emergency, we are on call and will be there when you need us!

    Call Danny at 416 312 4453 for a FULL CONSULTATION or
    to SCHEDULE YOUR SERVICE today!

    CONTACT US